WestNet 12V 10A Smart Battery Charger & Maintainer | Optima/Odyssey AGM-Ready | Color Screen | Repair & Supply | LiFePO4 + Lead-Acid
Leave it on the battery. The WestNet 12V 10A Smart Charger & Maintainer puts up to 10 A into a dead 12 V pack, then settles into a quiet maintain so the battery is ready the next time you turn the key.
One button. A color screen you can read from across the bench. No app, no account, no menu tree. It is built for the batteries people actually worry about: Optima and Odyssey-class AGM, plus GEL, EFB, everyday flooded lead-acid, and LiFePO4 with a working BMS.
Why people keep this one
- 10 A when you need it. About 140 W class output brings a flat car, truck, motorcycle, or ATV battery back, then holds it.
- The screen tells the truth. Current, battery level, and the active mode are on the face of the unit.
- Modes that match the battery, not a single dumb trickle: Car/Truck, Motorcycle, AGM/GEL/EFB, LiFePO4, REPAIR, and SUPPLY.
- REPAIR is a pulse-recovery mode for a sulfated lead-acid pack. SUPPLY holds a steady 12 V output when you need power on the bench.
- Winter / Summer. Temperature compensation for a cold Calgary garage or a hot afternoon.
- 4-150 Ah. From a motorcycle battery up to a light-truck or deep-cycle AGM.
- It watches the connection. Short-circuit, over-charge, over-current, over-voltage, and reverse-polarity care.
On the bench
Press the mode button once. The color screen wakes, the mode icon locks in, and the amps come up in plain digits. The clamps seat with a solid bite on the posts. When the battery is full, the charger eases off into maintain instead of cooking the pack. Unplug the wall cord first, then lift the clamps. That is the whole routine.
Specifications
| Brand | WestNet / WestNet N.A. |
|---|---|
| Model / SKU | WN-BC-12V10A |
| UPC-A | 731982506074 |
| Output | 12 V / 10 A, about 140 W |
| Input | 100-240 V AC, 50/60 Hz, US/CA plug |
| Battery size | 4-150 Ah |
| Chemistries | Flooded, AGM, GEL, EFB, LiFePO4 with BMS |
| Housing | ABS, 173 x 90 x 70 mm |
| Leads | About 60 cm red/black alligator clamps, about 0.75 m AC cord |
| Price | CAD $299.99 at Abdou Express. Make Offer welcome. |
In the box
- WestNet 12V 10A smart charger / maintainer
- AC power cord, US/CA plug
- Alligator-clip output leads
- User manual (PDF) - Product sheet (PDF)
Use it
- Confirm it is a 12 V battery and pick the chemistry. LiFePO4 mode only if the pack has a working BMS.
- Red clamp to positive. Black clamp to negative, or to chassis ground if the vehicle manual says so.
- Plug into a grounded outlet, press the mode button, and watch the screen. Unplug AC before you remove the clamps.
Safety
Not a toy. Dry indoor or covered-garage use only. Keep it away from wet, fuel, and anything that can burn. Stop if you smell heat, hear a fault, or the screen reports one. This listing does not claim a UL, CSA, or ETL mark unless that mark is on the unit you receive.
Ships from Abdou Express in Calgary. Buy it here - UPC 731982506074
WestNet N.A. - upc@westnet.ca - 403-774-7470
Optima and Odyssey are trademarks of their owners, named only so you know the AGM class this charger is set up for.
Certificate of Registration
Printable certificateWestNet 12V 10A Smart Battery Charger & Maintainer | Optima/Odyssey AGM-Ready | Color Screen | Repair & Supply | LiFePO4 + Lead-Acid is registered in the WestNet UPC Registry as GTIN 731982506074, certificate WN-UPC-61F3492B.